ATOS單向閥結構形式,供應阿托斯單向閥
Similar lubrication characteristics.
Check valve is the check valve Swing check valve installation location is not restricted,
Usually installed in the horizontal pipe, but can also be installed on the vertical pipe or inclined pipe.
否則需用外泄式，以降低控制油壓力。
SADR是直接操作檢查用于在線(xiàn)安裝的閥門(mén)端口尺寸從1/4“到11/4”GAS。
裝配位置/位置任何位置液壓液壓油符合DIN 51524 ... 535;
**粘度15÷100 mm2/ s - 允許范圍2,8÷500 mm2
In the reverse flow of oil flow without the back pressure of the oil can be used within the vent;
Otherwise need to use the type of leakage to reduce the control oil pressure.
SADR is a direct operation Check the valve port size for online installation from 1/4 "to 11/4" GAS.
Mounting position / position Any position Hydraulic hydraulic oil according to DIN 51524 ... 535;
單向閥控制油的泄漏方式有內泄式和外泄式二種。
流體污染等級ISO 4406等級21/19/16 NAS 1638等級10，
可使用在線(xiàn)過(guò)濾器 - 25μm（**β10_> 75）
流體溫度T≤80°C
流向如部分的符號所示
Flow as shown in the symbol
Rated flow see section Q / Δp
Recommended viscosity 15 ÷ 100 mm2 / s - Maximum permissible range 2,8 ÷ 500 mm2
They are designed for operation
Hydraulic system
Mineral oil or synthetic fluid

ATOS單向閥結構形式,供應阿托斯單向閥